Press Control Sensor D/flujo Automatico Bombas Agua 1.5/3bar

Descripción

Model NO. HYSK109B (pressure adjustable type)
Rated Voltage 220V-240V/
Max Current 10A
Starting Pressure Setting 1.5bar - 3bar
Max Working Temperature 60ºC
Max Power 1.1kw(220v-240v)
Max Working Pressure 10bar ( 1.1Kw)
Protection Rating IP65

Specification
The automatic controller for water pump is an intelligent pump control device installed on the pipeline. It can start and stop the pump according to the varied data such as water resource condition and pipeline pressure it detected. It can completely replace the traditional system constructed by pressure tank, pressure switch, water shortage protection devices, check valve and four-way valves. The particular patented check valve device can prevent the possible surging in the system. Pressure gauge shows system pressure variation and its inlet and outlet are assembled in 90° Right angle. The starting flow is 80-160L/h and can satisfy any need for home and garden sprinkling irrigation application.
WARNING

1. The power supply cable is an integrate part of the device. Should the cable the found to be damaged the device is to be replaced. Repairs to the cable itself are not possible.
2. The cable terminal must be never immersed into water.
3. The cable that is not used must be correctly insulated.
4. The electrical pump must be grounded to avoid any accidents.